Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)09 · Restraints
09 · Body & interior

Cap installation note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Air Bag System › Cap installation note
RestraintsCap installation note · page 1 of 2

See also: live page (the same text is also in the 2008 2.0L manual)

RESTRAINTS – Air Bag System – figure
Fig. 14: Prying Out Connector Stopper Plate
Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the connector.

CAP INSTALLATION NOTE

  1. The cap cannot be reused. Replace the cap with a new one when the cap or the passenger-side air bag module has been removed.

SIDE AIR BAG MODULE REMOVAL/INSTALLATION

WARNING: Handling the air bag module improperly can accidentally operate (deploy) the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module. (See AIR BAG SYSTEM SERVICE WARNINGS .) (See AIR BAG SYSTEM SERVICE CAUTIONS .)

If the side air bag module is installed with debris in the seat back,

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.