Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)09 · Restraints
09 · Body & interior

Passenger-side air bag module

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Air Bag System › Passenger-side air bag module
RestraintsPassenger-side air bag module · page 1 of 3

connector) of the SST (Adapter harness), and after 3 s , press the activation switch on the other SST (Deployment tool) to operate (deploy) the air bag module (both inflators).

RESTRAINTS – Air Bag System – figure
Fig. 38: Identifying Activation Switch
Courtesy of MAZDA MOTORS CORP.

WARNING: Verify that air bag module operation (explosive) sound occurs twice. If no operation (explosive) sound was heard or a single operation (explosive) sound was heard, both inflators would not have operated (deployed) properly. This may cause serious injury if the air bag module operates (deploy) unexpectedly. If the two operation (explosive) sounds are not heard, perform Step 8 again. If a total of two operation (explosive) sounds cannot be verified even though step 8 is performed again, leave the air bag module alone for 30 min or more before approaching it again.

The air bag module is very hot immediately after it is operated (deployed). You can get burned. Do not touch the air bag module for at least 15 min after deployment.

  1. Disconnect the SSTs (Deployment tool) from the SSTs (Adapter harness).

PASSENGER-SIDE AIR BAG MODULE

WARNING: The passenger-side air bag module is a dual inflator type. If one

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.