Longitudinal dimensions (page 2 of 2)
- Make
- MG
- Model
- MGF Body Repair Manual
- Year
- 1995–2000
- Section
- Body dimensions
InformationLongitudinal dimensions · page 2 of 2
| Location | Dimension | Reference |
|---|---|---|
| Front bulkhead centre crossmember paint drain hole to datum line Front subframe front mounting inner hole to datum line Front subframe rear mounting inner hole to datum line Floor longitudinal jig hole to datum line Front suspension damper mount to datum line Longitudinal reinforcement to dash side jig hole to datum line Main floor lower reinforcement plunge hole to datum line Main floor drain hole/jig hole to datum line Rear subframe front mounting centre hole to datum line Rear suspension damper mount to datum line Rear subframe rear mounting inner hole to datum line Luggage floor longitudinal jig hole to datum line | -441.7mm -527.5mm 135.3mm 300mm -96.3mm 339mm 895mm 1550mm 1822mm 2274.5mm 2459.3mm 2800mm | 1 2 3 3a 4 5 6 7 8 9 10 11 |
All dimensions taken at centre line of set screw, set screw hole or jig hole.
Parts & tools for this job For 1995 MG MGF
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: MG touch up paint
- PARTPanel clip assortmentSearch: MG panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.