Vertical dimensions (page 2 of 2)
- Make
- MG
- Model
- MGF Body Repair Manual
- Year
- 1995–2000
- Section
- Body dimensions
InformationVertical dimensions · page 2 of 2
| Location | Dimension | Reference |
|---|---|---|
| Front bulkhead centre crossmember paint drain hole to datum line Front subframe front mounting inner hole to datum line Front bumper mounting inner hole to datum line Front subframe rear mounting inner hole to datum line Floor longitudinal jig hole to datum line Front suspension damper mount to datum line Longitudinal reinforcement to dash side jig hole to datum line Main floor lower reinforcement jig hole to datum line Main floor rear drain hole/jig hole to datum line Rear subframe front mounting centre hole to datum line Rear subframe rear mounting inner hole to datum line Luggage floor longitudinal jig hole to datum line Rear suspension damper mount to datum line Rear bumper mounting inner hole to datum line | 154mm -28mm 102.5mm -152.8mm -152.8mm 338.2mm -145mm -143.5mm -118mm -14mm 106mm 78mm 337mm 153mm | 1 2 2a 3 4 5 5a 6 7 8 9 10 11 12 |
All dimensions taken at centre line of set screw, set screw hole or jig hole.
Parts & tools for this job For 1995 MG MGF
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: MG touch up paint
- PARTPanel clip assortmentSearch: MG panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.