General
- Make
- Rover
- Model
- 100 Repair Manual Supplement
- Year
- 1996–1998
- Section
- Torque wrench settings › General
InformationGeneral
Refer to the appropriate section heading for component torque figures, e.g. Road wheel nuts - refer to SUSPENSION, Exhaust front pipe to manifold - refer to MANIFOLD AND EXHAUST
GENERAL
| Bolt M6 | 10 Nm |
| Bolt M8 | 25 Nm |
| Bolt M10 | 45 Nm |
| Bolt M12 | 80 Nm |
ENGINE
| Timing belt cover bolts | 5 Nm |
| Timing belt tensioner pulley backplate screw | 10 Nm |
| Timing belt tensioner pulley Allen screw | 45 Nm |
| Cylinder head bolts: | |
| 1st stage* | 20 Nm |
| 2nd stage* | a further 180° |
| 3rd stage* | a further 180° |
| Timing belt rear cover bolts | 10 Nm |
| Camshaft gear bolt | 35 Nm |
| Camshaft cover bolts | 10 Nm |
| Engine lifting bracket bolt | 9 Nm |
| Engine LH support member bolts | 45 Nm |
| Engine mounting to support member bolts | 45 Nm |
| Engine steady bar bracket bolts to engine | 85 Nm |
| Flywheel rear cover plate bolts: | |
| M6 bolts | 8 Nm |
| M10 nut/bolt | 38 Nm |
| Flywheel front cover plate bolts | 8 Nm |
| Flywheel lower cover plate bolts | 8 Nm |
| Engine steady bracket bolt to body | 45 Nm |
Parts & tools for this job For 1996 Rover 100
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 100
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.