Modular engine management system
- Make
- Rover
- Model
- 100 Repair Manual Supplement
- Year
- 1996–1998
- Section
- Torque wrench settings › Modular engine management system
InformationModular engine management system
MODULAR ENGINE MANAGEMENT SYSTEM
| Fuel feed pipe to fuel rail bolts | 5 Nm |
| Idle air control valve (IACV) Torx screws | 8 Nm |
| Engine coolant temperature (ECT) sensor | 15 Nm |
| Crankshaft position (CKP) sensor | 6 Nm |
| Throttle position (TP) sensor | 1.5 Nm |
| Air cleaner to battery tray bolts | 9 Nm |
| Fuel filter outlet union | 28 Nm |
| Fuel filter inlet union | 28 Nm |
| Fuel rail feed hose bolts | 10 Nm |
| Fuel rail to inlet manifold bolts | 10 Nm |
| Intake air temperature (IAT) sensor | 7 Nm |
| Oxygen (H02S) sensor | 55 Nm |
| Distributor cap screws | 3 Nm |
| Rotor arm screw | 8 Nm |
| Spark plugs | 27 Nm |
| Ignition coil: | |
| M10 bolts | 25 Nm |
| M6 bolt | 9 Nm |
| Throttle housing bolts | 7 Nm |
MANIFOLDS AND EXHAUST
| Front pipe to manifold nuts | 50 Nm |
| Inlet manifold support stay bolt | 25 Nm |
| Catalytic converter nuts | 45 Nm |
| Exhaust manifold nuts* | 45 Nm |
| Inlet manifold to cylinder head nuts/bolts* | 25 Nm |
| Inlet manifold chamber to inlet manifold bolts | 25 Nm |
* Tighten in sequence
MANUAL GEARBOX
| Gearcase bolt | 28 Nm |
| Gearbox mounting bracket to gearbox bolts | 80 Nm |
| Gearbox drain plug | 35 Nm |
| Gearbox filler/level plug | 35 Nm |
Parts & tools for this job For 1996 Rover 100
- PARTEngine gasket setSearch: Rover 100 1996 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.