Workshop Manuals Factory service & repair Rover
Rover 400 Workshop Manual (1995-2000)18 · Manual gearbox - R65
18 · Transmission

Manual gearbox

Make
Rover
Model
400 Workshop Manual
Year
1995–2000
Section
Repairs › Manual gearbox
Manual gearbox - R65Manual gearbox · page 1 of 5

MANUAL GEARBOX

Service repair no - 37.20.02.99

Remove

  1. Raise front of vehicle.

WARNING: Support on safety stands.

  1. Remove underbelly panel. See BODY, Exterior fittings.
  2. Remove starter motor. See ELECTRICAL, Repairs.
Manual gearbox – Remove starter motor. See ELECTRICAL, Repairs.
  1. Remove 4 bolts securing battery tray to mounting bracket.
  2. Remove battery tray.
Manual gearbox – Remove battery tray.
  1. Remove bolt securing air intake hose to battery tray mounting bracket.
  2. Remove 2 bolts securing battery tray mounting bracket to body.
  3. Loosen 2 bolts securing battery tray mounting bracket to body.
  4. Release clip securing harness to body and position harness aside.
  5. If fitted: Disconnect multiplug from dim dip resistor.
  6. Remove battery tray mounting bracket.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.