14.INSPECT EXHAUST MANIFOLD - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 14.INSPECT EXHAUST MANIFOLD - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
14.INSPECT EXHAUST MANIFOLD
a.

Using a precision straightedge and feeler gauge, measure the warpage of the surface where the intake manifold contacts the cylinder head sub-assembly. Maximum warpage:
0.10 mm (0.00394 in.) If the warpage is more than the maximum, replace the intake manifold.
17141
14.INSPECT EXHAUST MANIFOLD
a.

Using a precision straightedge and feeler gauge, measure the warpage of the surface where the exhaust manifold contacts the cylinder head sub-assembly. Maximum warpage:
0.10 mm (0.00394 in.) If the warpage is more than the maximum, replace the exhaust manifold.
13511
15.INSPECT CAMSHAFT
a. Inspect the camshaft runout.
i. Place the camshaft on V-blocks. ii. Using a dial indicator, measure the circle runout at the center journal. Maximum circle runout:
0.03 mm (0.00118 in.) If the circle runout is more than the maximum, replace the camshaft.
HINT: Check the oil clearance after replacing the camshaft.
b. Inspect the cam lobes.
i. Using a micrometer, measure the cam lobe height.
Parts & tools for this job For Toyota Hilux
- PARTExhaust gasketSearch: Toyota Hilux exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.