5.INSPECT CAMSHAFT TIMING SPROCKET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 5.INSPECT CAMSHAFT TIMING SPROCKET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
5.INSPECT CAMSHAFT TIMING SPROCKET

a.

*a Stopper Plate *b Plunger
Move the stopper plate upward to release the lock. Push the plunger and check that it moves smoothly. If necessary, replace the No. 2 chain tensioner assembly.
13523
5.INSPECT CAMSHAFT TIMING SPROCKET
a. Wrap the No. 2 chain sub-assembly around the camshaft timing sprocket.
b.

Using a vernier caliper, measure the camshaft timing sprocket diameter with the No. 2 chain sub-assembly. Minimum sprocket with chain diameter:
97.79 mm (3.85 in.) If the diameter is less than the minimum, replace the No. 2 chain sub-assembly and camshaft timing sprocket.
HINT: The vernier caliper must contact the No. 2 chain sub-assembly rollers for the measurement.
13521
6.INSPECT CRANKSHAFT TIMING SPROCKET
a. Wrap the No. 1 chain sub-assembly around the crankshaft timing sprocket.
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.