17.INSPECT CAMSHAFT OIL CLEARANCE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 17.INSPECT CAMSHAFT OIL CLEARANCE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
17.INSPECT CAMSHAFT OIL CLEARANCE

17.INSPECT CAMSHAFT OIL CLEARANCE
a. Clean the No. 1 camshaft bearing cap, No. 2 camshaft bearing caps, camshaft journals and No. 2 camshaft journals.
b. Place the camshaft and No. 2 camshaft on the cylinder head sub-assembly.
c.

*a Plastigage
Lay a strip of Plastigage across each of the camshaft journals.
d. Install the No. 1 camshaft bearing cap and No. 2 camshaft bearing caps to the cylinder head sub-assembly.
NOTICE: Do not turn the camshaft and No. 2 camshaft.
e. Remove the No. 1 camshaft bearing cap and No. 2 camshaft bearing caps from the cylinder head sub- assembly.
f.

Measure the Plastigage at its widest point. Standard Oil Clearance:
| Item | Specified Condition |
|---|---|
| No. 1 journal | 0.040 to 0.077 mm (0.00157 to 0.00303 in.) |
| Other journals | 0.025 to 0.062 mm (0.000984 to 0.00244 in.) |
Maximum Oil Clearance:
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.