R.R. FRONT WING MOUNTING BRACKET

Operation 7210A30 · Structural elements (front part)

Removing

Check if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges).

If necessary, straighten the body before removing the part.

1. Undo the bolts shown in the figure.

2. Remove the side bracket from the car.

Refitting

1. Provisionally fit the side bracket to the car.

2. Position front wing (2a) and front bumper (2b), lower bonnet lid (2c).

Check alignment and ensure the surrounding gap is even.

Remove the components fitted previously.

Paint the front bracket (use the specified cycle).

1. Apply wax.