Rear brake disc - r r

Operation 3310B48 · REAR DISC BRAKES

Removing

Position the vehicle on the ramp.

Proceed with the removal - 4450B11 WHEEL (one) rear - R.R..

1. Undo the nut (1a) on the bolt and move the front rear suspension front trailing arm (1b) as much as necessary.

This operation enables you to access the bottom bolt securing the brake caliper bracket.

2. Undo the nut on the top bolt securing the shock absorber to the hub vertical link.

This operation enables you to access the top bolt securing the brake caliper bracket.

3. Undo the bolts (3a), move the bracket (3b) complete with rear brake caliper (3c) after releasing the flexible pipe from the attachment on the shock absorber, then secure it appropriately.

1. Undo the bolt (1a) and remove the rear brake disc (1b).

Refitting

1. Refit the rear brake disc (1a) in its seating and fix it tightening the bolt (1b) to the specified torque.

1. Refit the bracket (1a) in its seating complete with rear brake caliper (1b) and tighten the bolts (1c) to the specified torque.

Fix the brake caliper flexible pipe to the shock absorber.

2. Tighten the nut on the top bolt securing the shock absorber to the hub vertical link to the specified torque.

3. Refit in its seating the rear suspension front trailing arm (3a) and tighten the nut (3b) to the recommended torque.

Proceed with the refitting - 4450B11 WHEEL (one) rear - R.R..

Remove the car from the ramp.