Rear calliper bracket - r r

Operation 3310B57 · REAR DISC BRAKES

Removing

Position the vehicle on the ramp.

Proceed with the removal - 4450B11 WHEEL (one) rear - R.R..

1. Undo the nut (1a) of the bolt and move the rear suspension front trailing arm (1b) as much as necessary.

This operation enables you to access the bottom bolt securing the brake caliper bracket.

2. Undo the nut on the top bolt securing the shock absorber to the hub vertical link.

This operation enables you to access the top bolt securing the brake caliper bracket.

3. Undo the bolts (3a) and move the rear brake caliper (3b) away from its bracket.

1. Remove the rear brake pads.

2. Undo the bolts (2a) and remove the rear brake caliper bracket (2b).

Refitting

1. Refit the rear brake caliper bracket (1a) in its seating and tighten the bolts (1b) to the recommended torque.

1. Compress the rear brake caliper piston (1a) using the tool (1b) to facilitate the fitting of the brake caliper.

1. Refit the rear brake caliper (1a), complete with brake pads, in its housing and tighten the bolts (1b) to the specified torque.

2. Tighten the nut on the top bolt securing the shock absorber to the hub vertical link to the specified torque.

3. Refit the rear suspension rear trailing arm (3a) in its seating and fix it tightening the nut (3b) to the recommended torque.

Proceed with the refitting - 4450B11 WHEEL (one) rear - R.R..

Remove the car from the ramp.