Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)08 · Engine
08 · Engine

Radiator cooling fan - r + r

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
Engine cooling › Radiator cooling fan - r + r
EngineRadiator cooling fan - r + r

Radiator cooling fan - r + r

Operation 1088E10 · Coolant temperature control devices

1.6 TS

Removing

Position the vehicle on the ramp.

Proceed with the removal - 5530B10 battery - r+r.

Proceed with the removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with the removal - 1048A10 air cleaner filtering element - replace.

1. Disconnect the upper coolant inlet hose to the radiator.

Manually press the springs and remove the rapid attachment for the hose.

Recover the coolant which comes out in a suitable container.

Radiator cooling fan - r + r

1. Undo the bolts (1a) and remove the complete radiator cooling fan (1b).

Radiator cooling fan - r + r

Refitting

Place the radiator cooling fan back in its housing and secure it using the bolts.

Connect the upper radiator coolant inlet hose.

Proceed with the refitting - 1048A10 air cleaner filtering element - replace.

Proceed with the refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with the refitting - 5530B10 battery - r+r.

Refill the engine cooling system - 0010T20 coolant change.

Remove the car from the ramp.

2.0 TS

Removing

Position the vehicle on the ramp.

Proceed with the removal - 5530B10 battery - r+r.

Proceed with the removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with the removal - 1048A10 air cleaner filtering element - replace.

1. Disconnect the upper coolant inlet hose to the radiator.

Manually press the springs and remove the rapid attachment for the hose.

Recover the coolant which comes out in a suitable container.

Radiator cooling fan - r + r

1. Undo the bolts (1a) and remove the complete radiator cooling fan (1b).

Radiator cooling fan - r + r

Refitting

Place the complete radiator cooling fan back in its housing and secure it using the bolts.

Connect the upper radiator coolant inlet hose.

Proceed with the refitting - 1048A10 air cleaner filtering element - replace.

Proceed with the refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with the refitting - 5530B10 battery - r+r.

Refill the engine cooling system - 0010T20 coolant change.

Remove the car from the ramp.

1.9 JTD 8V

Removing

Place the car on a ramp.

- 5530B10 battery - r+r.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

- 1048A10 air cleaner filtering element - replace.

1. Disconnect the upper coolant inlet hose to the radiator.

Manually press the springs and remove the hose's rapid attachment.

Recover the coolant which comes out in a suitable container.

Radiator cooling fan - r + r

1. Undo the bolts (1a) and remove the complete radiator cooling fan (1b).

Radiator cooling fan - r + r

Refitting

Place the complete radiator cooling fan back in its housing and secure it using the bolts.

Connect the upper coolant inlet hose to the radiator.

- 1048A10 air cleaner filtering element - replace.

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

- 5530B10 battery - r+r.

- 0010T20 coolant change.

Remove the car from the ramp.

1.9 JTD 16V

Removing

Position the vehicle on the ramp.

Proceed with removal - 7025A12 Engine front sound insulation COVER - R.R..

Proceed with removal - 7025A14 Bonnet LID - R.R..

Proceed with removal - 1016A10 sound-proofing cover - r + r.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
BatteryA1B

Proceed with removal - 7055B54 under-engine guard - r r.

Proceed with removal - 5530B10 battery - r+r.

Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with removal - 1048A10 air cleaner filtering element - replace.

1. Undo the bolts (1a) and remove the radiator cooling fan (1b).

Radiator cooling fan - r + r

Refitting

Place the radiator cooling fan back in its housing and secure it using the bolts.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.

Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R..

Proceed with refitting - 5530B10 battery - r+r.

Proceed with refitting - 7055B54 under-engine guard - r r.

Refill the engine cooling system with coolant - 0010T20 coolant change.

Connect the negative (-) battery terminal.

Proceed with refitting - 1016A10 sound-proofing cover - r + r.

Proceed with refitting - 7025A14 Bonnet LID - R.R..

Proceed with refitting - 7025A12 Engine front sound insulation COVER - R.R..

Remove the car from the ramps.

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.