Engine oil filler - r r

Operation 1084A22 · Indicators/check devices

1.9 JTD 16V

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal - 1016A10 sound-proofing cover - r + r.

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the engine oil filler.

2. Disconnect the electrical connection from the engine coolant temperature sensor.

1. Undo the bolts (1a) and remove the engine oil filler (1b).

2. Remove the gasket.

Refitting

1. Place the engine oil filler (1a), complete with gasket (1b), back in its housing and secure it tightening the bolts (1c) to the recommended torque.

Connect the electrical connection to the engine coolant temperature sensor.

Connect the oil vapour recovery pipe to the engine oil filler and tighten the band.

Proceed with refitting - 1016A10 sound-proofing cover - r + r.

Connect the negative (-) battery terminal.