Engine oil temperature sender unit - r + r

Operation 1084A46 · Indicators/check devices

3.2 V6

Removing

Position the vehicle on the ramp.

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal - 4450B04 right front wheel r r.

Proceed with removal - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R..

1. Disconnect the electrical connection from the engine oil temperature sender unit.

2. Undo and remove the engine oil temperature sender unit.

Refitting

Place the engine oil temperature sender unit in its seating and tighten it to the recommended torque.

Connect the electrical connection to the engine oil temperature sender unit.

Proceed with refitting - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R..

Proceed with refitting - 4450B04 right front wheel r r.

Connect the negative (-) battery terminal.

Remove the car from the ramps.