Power unit lower reaction link r r
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2004
- Section
- Power unit supports › Power unit lower reaction link r r
Power unit lower reaction link r r
Removing
Position the vehicle on the ramp.
1. Undo the bolt (1a) and the nut (1b) and remove the lower reinforcement link (1c) for the power unit.
Refitting
1. Place the power unit lower reaction rod (1a) back in its housing and fix it tightening the bolt (1b) and the nut (1c) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Power unit rear rigid mounting side) 6.8 ÷ 8.3 |
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Nut | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Engine crankcase side) 2.7 ÷ 3.4 |
Remove the car from the ramp.
Removing
Position the vehicle on the ramp.
1. Undo the bolt (1a) and the nut (1b) and remove the power unit lower reaction rod (1c).
Refitting
1. Place the power unit lower reaction rod (1a) back in its housing and fix it tightening the bolt (1b) and the nut (1c) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Power unit rear rigid mounting side) 6.8 ÷ 8.3 |
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Nut | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Engine crankcase side) 2.7 ÷ 3.4 |
Remove the car from the ramp.
Removing
Position the vehicle on the ramp.
1. Undo the bolt (1a) and the nut (1b) and remove the power unit lower reaction rod (1c).
Refitting
1. Place the power unit reaction rod (1a) back in its housing and fix it tightening the bolt (1b) and the nut (1c) to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1b | Bolt | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Power unit rear rigid mounting side) 6.8 ÷ 8.3 |
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1c | Nut | POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD.... | M12 | (Engine crankcase side) 2.7 ÷ 3.4 |
Remove the car from the ramp.
Parts & tools for this job For 2000 Alfa Romeo 147
- PARTEngine gasket setSearch: Alfa Romeo 147 2000 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.