Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo 147 Factory Service Manual (2000-2004)19 · Wiring diagrams and electrical functions
19 · Electrical

REAR FOG LAMPS - Description

Make
Alfa Romeo
Model
147 Factory Service Manual
Year
2000–2004
Section
Interior lighting › REAR FOG LAMPS - Description
Wiring diagrams and electrical functionsREAR FOG LAMPS - Description

REAR FOG LAMPS - Description

Description

The vehicle is equipped with a bright rear fog lamp, located in the centre of the left rear light cluster (on the boot).

The rear fog lamp is activated via a special button in the centre panel; there is also an LED at the rear of the button which comes on when the light is on.

The switching on of the rear fog lamp is managed by the Body Computer: it is activated in the following conditions:

  • go ahead signal with ignition ON (INT);
  • signal from the switch in the panel;
  • side lights on signal.
  • headlamps signal (dipped or main beam) or fog lights on.

If one of the go ahead signals is missing, the button must be pressed again in order to switch the rear fog lamp on.

The correct operation of the light is controlled by the rear fog lamp 'check' function: the following are checked:

  • open circuit (bulb missing or wiring broken) which can be diagnosed if there is no command
  • short circuit to earth (bulb short circuit or wiring short circuit to earth)
  • short circuit to Vbatt (wiring short circuit to Vbatt)
  • 21 W bulb replaced with a 5 W bulb

If one of the situations described above is detected, the Body Computer notifies the CAN of the failure state: the special 'lights failure' warning light in the instrument panel comes on and, at the same time, the information is shown on the display.

Parts & tools for this job For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.