WASH/WIPE INPUT CONTROLS INTERFACES

TC3: Windscreen wiper zeroing cam: this cam is a switch fitted on the motor which is normally closed when the wiper is in the rest position (windscreen wiper blades downwards and still).

TL2: Rearscreen wiper zeroing cam: this cam is a switched fitted to the motor which is normally open when the wiper is in the rest positino (rearscreen wiper blade downwards and still). All the above signals are the active earthed type.

RM: Reverse gear engaged signal: the control provides an active signal at +15 when reverse gear is engaged. The same control supplies the reversing lights.

TCI-TC2: windscreen wiper control outputs;

TL1: rearscreen wiper control output;

P1-P2: electric pump control outputs;

BC5: headlamp washer go ahead to Body Computer. The electronic module supplies a positive comman.