Bench reassembly
- Make
- Alfa Romeo
- Model
- 155 Factory Service Manual
- Year
- 1992–1998
- Section
- Bench reassembly › Bench reassembly
Gearbox and differentialBench reassembly · page 1 of 7
BENCH REASSEMBLY
- If previously removed, install a new guide pin for the engagement of reverse gear and caulk the outer tip.
- Install the speed control lever, securing it to the gearbox using the two screws which should then be tighten to the prescribed torque.
- install the speed control prong by inserting the relative securing pin and tightening the screw to the prescribed torque.
- part name
- part name
- part name
7 ÷ 9 Nm
(0.71 ÷ 0.92 kgm)
24 ÷ 31 Nm
(2.45 ÷ 3.16 kgm)
Parts & tools for this job For 1992 Alfa Romeo 155
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 155
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.