AIR FLOW METER - R + R

Operation 1056B10 · MULTI-POINT INJECTION SYSTEM (MPI)

3.2 V6

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

Proceed with removal

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R

1. Disconnect the electrical connection from the air flow meter.

2. Undo the nuts (2s) and remove the brackets (2b) securing the air flow meter to the aiar filter cover.

3. Remove the air flow meter (3a), complete with hose (3b).

Refitting

Refit the air flow meter in its seating complete with hose, then secure it using the brackets and nuts.

Connect the electrical connection to the air flow meter.

Proceed with refitting

Op. 1048A28 VACUUM AIR CIRCUIT RESONATOR PIPE - R+R.

Connect the negative (-) battery terminal