Check the tyre wear status.

Specifically:

- wear on outer edge;

- wear on inner edge;

- wear on tyre shoulder;

- tread wear

1. Uniform wear on both sides: inflation pressure low

2. Step wear on one side (outer or inner)

3. Wear on outer edge: exterior smooth

4. Tyre shoulder wear

5. Central tread wear: inflation pressure excessive

6. Uniform wear on tread surface: compound quality

7. Tread wear.

1. Make sure tyres are inflated to the correct pressure. If necessary, replace the tyres.

2. Move on to Step 2

3. Move on to Step 2

4. The problem is due to the customer''s over-sporty driving style: if necessary, replace the tyres.

5. Make sure tyres are inflated to the correct pressure. If necessary, replace the tyres.

6. Replace the tyres.

7. Replace the tyres.

Restore correct geometry

Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES ADJUSTMENT IF NECESSARY

if necessary, replace the front tyres.

Restore correct geometry

Op. 4450A40 REAR WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT, INCLUDES ADJUSTMENT IF NECESSARY

if necessary, replace the rear tyres.

1. Front shock absorbers inefficient.

2. Rear shock absorbers inefficient.

1. Replace the front shock absorbers.

Op. 4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R

If necessary, replace the front tyres.

2. Replace the rear shock absorbers.

Op. 4420A30 REAR SUSPENSION SHOCK ABSORBER (ONE), LEFT OR RIGHT - R.R. - CHECK WHEEL GEOMETRY SEPARATELY

If necessary, replace the rear tyres.