Timing angles
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- Engine › Timing angles
SpecificationsTiming angles
TIMING ANGLES
| 1.2 petrol | 1.3 Multijet | 1.4 petrol | ||
|---|---|---|---|---|
| Operational check clearance (mm) | Inlet | 0,3 ± 0,05 | (*) | (*) |
| Exhaust | 0,4 ± 0,05 | (*) | (*) | |
| Timing check clearance (mm) | Inlet | 0,80 | 0,5 | 0,45 |
| Exhaust | 0,80 | 0,5 | 0,45 | |
| Inlet | Opens (after TDC) | 7° | -12° | -2° |
| Closes (after BDC) | 35° | 6° | 42° | |
| Exhaust | Opens (before BDC) | 62° | 40° | 35° |
| Closes (before TDC) | -9° | -12° | -2° |
(*) hydraulic tappets
Parts & tools for this job For 2007 Fiat 500
- PARTEngine gasket setSearch: Fiat 500 2007 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.