2110 manual gearbox and differential
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- 21 gearbox › 2110 manual gearbox and differential
Tightening torques2110 manual gearbox and differential
2110 MANUAL GEARBOX AND DIFFERENTIAL
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Join between gearbox and engine (gearbox side) | Bolt | M12x1.25 | 8.0 | all versions |
| Join between gearbox and engine (engine side) | Nut | M12x1.25 | 8.0 | all versions |
| Lower support for join between gearbox and engine | Nut | M10x1.25 | 4.0 | 1.2 8v |
| Lower support for join between gearbox and engine | Bolt | M12x1.25 | 5.5 | all versions |
| Lower support for join between gearbox and engine (on crankcase) | Bolt | M8x1.25x23 | 2.5 | 1.2 8V |
| Lower support for join between gearbox and engine | Bolt | M10x1.25 | 4.0 | 1.3 Multijet |
| Bracket on engine block (rear) | Bolt | M8 | 2.7 | 1.2 8v |
| Manual gearbox earth | Nut | M8 | 1.5 | all versions |
| Gearbox/engine reinforcement bracket (on engine block) | Bolt | M8x1.25x50 | 3.0 | 1.3 Multijet |
| 5th speed pawl | Bolt | M6 | 1.2 | all versions (C514 gearbox) |
| 5th speed fork | Bolt | M6 | 1.2 | all versions (C514 gearbox) |
| Reverse fork support | Bolt | M8 | 1.5 | all versions (C514 gearbox) |
| 5th speed gear ring nut on main and layshaft | M20x1.5 | 11.8 | all versions (C514 gearbox) | |
| Gear selector and engagement assembly (on gearbox casing) | Bolt | M6 | 1.0 | all versions (C514 gearbox) |
| Gear selector and engagement assembly (on gearbox casing) | Bolt | M8 | 2.0 | all versions (C514 gearbox) |
| Speedometer control shaft | Bolt | M6 | 1.0 | all versions (C514 gearbox) |
| Gear selection lever assembly | Nut | M8 | 2.0 | all versions (C514 gearbox) |
| Differential casing retaining flange (on support) | Bolt | M8 | 2.0 | all versions (C514 gearbox) |
| Gearbox casing (on gearbox/engine support) | Bolt | M8 | 2.0 | all versions (C514 gearbox) |
| Differential cover (on gearbox/engine support) | Bolt | M8 | 2.0 | all versions (C514 gearbox) |
| Differential cover (on gearbox/engine support) | Bolt | M10x1.25 | 3.5 | all versions (C514 gearbox) |
| Gearbox oil filler tapered plug | 22x1.5 | 2.5 | all versions (C514 gearbox) | |
| Gearbox fluid tapered drain plug | 16x1.5 | 1.8 | all versions (C514 gearbox) | |
| Bearing retaining plate (on gearbox casing) | Bolt | M8 | 2.0 | all versions (C514 gearbox) |
| Reverse shaft | Bolt | M8 | 2.6 | all versions (C514 gearbox) |
| Gearbox to engine | Bolt | M12x1.25 | 4.5 | all versions (C514 gearbox) |
| Main shaft | Nut | M16x1.5 | 11.5 | 1.4 16V |
| Layshaft | Nut | M12x1 | 10.5 | 1.4 16V |
| Gearbox cover | Bolt | M6 | 1.1 | 1.4 16V |
| Reverse engagement switch | M18x1.5 | 3.8 | all versions (C514 gearbox) | |
| Differential crown wheel | Bolt | M10x1.25 | 8.8 | all versions (C514 gearbox) |
| Intermediate driveshaft bearing support | Bolt | M8 | 2.2 | 1.3 Multijet |
Parts & tools for this job For 2007 Fiat 500
- PARTClutch kitSearch: Fiat 500 2007 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat 500 manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.