4410 front suspension
- Make
- Fiat
- Model
- 500 Factory Service Manual
- Year
- 2007–2024
- Section
- 44 suspension and wheels › 4410 front suspension
Tightening torques4410 front suspension
4410 FRONT SUSPENSION
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Shock absorber (on turret) | Nut | M12x1.25 | 4.5 | all versions |
| Shock absorber (on steering knuckle) | Nut | M10x1.25 | 7.5 | all versions |
| Shock absorber stem mounting | Nut | M12x1.25 | 6.5 | all versions |
| Track control arm (on steering knuckle) | Nut | M8 | 3.2 | all versions |
| Track control arm front bush (on suspension crossmember) | Bolt | M12x1.25 | 12.0 | all versions |
| Track control arm rear bush (on suspension crossmember) | Bolt | M12x1.25 | 10.0 | all versions |
| Suspension crossmember (front fastenings on body) | Bolt | M12x1.25 | 12.0 | all versions |
| Suspension crossmember (side rear fastenings on body) | Bolt | M14x1.25 | 16.5 | all versions |
| Suspension crossmember (centre rear fastenings on body) | Bolt | M14x1.5x70 | 15.0 | all versions |
| Third load line (on suspension crossmember side fastening) | Bolt | M12x1.25 | 7.0 | all versions |
| Third load line (on suspension crossmember) | Bolt | M10x1.25 | 5.5 + 90° | all versions |
| Side rod (on suspension crossmember) | Bolt | M10x1.25 | 4.5 | all versions |
| Anti-roll bar (on suspension crossmember) | Bolt | M8 | 2.0 | all versions |
| Anti-roll bar (to reaction rod) | Nut | M10x1.25 | 5.0 | all versions |
| Reaction rod (on front shock absorber) | Nut | M10x1.25 | 5.0 | all versions |
Parts & tools for this job For 2007 Fiat 500
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTFront shock absorbersSearch: Fiat 500 2007 front shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.