SUN ROOF - FUNCTIONAL DESCRIPTION

1.2 8v, 1.3 Multijet, 1.4 16v

FUNCTIONAL DESCRIPTION

The sun roof control unit M095 receives a direct battery power supply, at pin 6, via the line protected by fuse F15 of the engine compartment junction unit B001 (pin 4 of connector B).

The Body Computer M001 provides an ignition-controlled power supply (INT), from pin 9 of connector C, for the control unit M095 (pin 3) along the line protected by fuse F51.

Pin 1 of the sun roof control unit M095 is connected to the left rear earth C030.

The Body Computer M001 (pin 19 of connector B) also provides the vehicle speed signal (VSO) for the control unit M095 (pin 8), forwarding the signal received via the C-CAN (pins 44 and 45 of connector B) from the braking system control unit M051.

See E1050 CAN CONNECTION LINES

The sun roof selector H060, which houses the roof operating buttons, receives a fixed earth at pin 1; the control unit H060 sends the opening command for the roof, from pin 3, via the earth signal sent to pin 5 of control unit M095; it controls the closing of the roof, on the other hand, from pin 2, via the signal sent to pin 10 of M095.

The Body Computer M001 receives a direct battery power supply (pin 1 of connector A) protected by fuse F01 of the engine compartment junction unit B001 (pin 18 of connector B); it also receives an ignition-controlled power supply (INT) at pin 11 of connector E.

The Body Computer M001 is also connected to the driver''s dashboard earth C015 via pins 9 and 10 of connector E.