Clutch hydraulic actuator - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Clutch release controls › Clutch hydraulic actuator - r.r.
‹ Prev Master cylinder (pump) - r r for right hand drive versionsNext › Flexible pipe from rigid intermediate pipe to master cylinder (pump) - r.r. for right hand drive versions
ClutchClutch hydraulic actuator - r.r.
CLUTCH HYDRAULIC ACTUATOR - R.R.
Removing
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
- Unscrew the brake fluid reservoir cap and fit the tool.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 2000001400 | Plug | Brake/ clutch system vacuum |
1. Lift up the clip (1a) and disconnect the clutch fluid pipe (1b).
2. Undo the bolts (2a) and remove the operating cylinder (2b).
Refitting
- Place the operating cylinder in position and secure it tightening the bolts to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Hydraulic clutch actuator | Bolt | M8 | 1.8 ÷ 2.2 | 1.4 16v |
- Connect the clutch fluid pipe to the slave cylinder and secure it using the clip.
Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R
Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY
‹ Prev Master cylinder (pump) - r r for right hand drive versionsNext › Flexible pipe from rigid intermediate pipe to master cylinder (pump) - r.r. for right hand drive versions
Parts & tools for this job For 2007 Fiat Bravo
- PARTClutch kitSearch: Fiat Bravo 2007 clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Fiat Bravo manual gearbox oil
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.