BLUETOOTH ELECTRONIC CONTROL UNIT - R.R.

Operation 5570T49 · CAR RADIO/CAR TELEPHONE/VIDEO

Removing

- Make sure that the battery is disconnected.

- Open the dashboard compartment flap.

1. Loosen the bluetooth control unit support fixing bolts (1a).

1. Extract the bluetooth control unit mounting (1b).

2. Detach the electrical connection for the bluetooth control unit.

3. Undo the bolts (3a) and remove the control unit (3b) from the mounting (3c).

Refitting

- Check that the Bluetooth control unit is not damaged.

- Position the control unit on the mounting and secure it using the bolts.

- Secure the electrical connection for the control unit.

- Place the support and control unit in position.

- Tighten the control unit mounting fixing bolts.

- Close the glove compartment flap.

The control unit must be connected electrically at least 5 minutes before the key on.

Some of the CAN nodes, including the Bluetooth control unit, are programmed with default settings that the customer will find when they purchase the vehicle. If the control unit is being replaced, the Parts Dept. will send a pristine component: once fitted, the data memorized in the Body Computer must be transferred to it by carrying out the PROXY ALIGNMENT procedure using the Examiner.