Car radio equipment - r+r
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Accessories › Car radio equipment - r+r
CAR RADIO EQUIPMENT - R+R
Removing
1. Insert the special tools (1a) fully in the housings (1b) in the radio, until the recesses (1c) are attached.
| Tool | Description | Function | Validity |
|---|---|---|---|
| 2000024200 | Fork | Radio extraction |
1. Grip the tools (1a) and, pushing them towards the outside and pulling them towards oneself, extract the radio (1b).
2. Extract the tools (1a) from the radio pressing the tabs (2a) on both sides of the actual radio.
1. Disconnect the aerial connection.
2. Disconnect the electrical connections (2a, 2b).
| Description | Connector | |
|---|---|---|
| 2 | RADIO | See P020 RADIO |
3. Keep the radio.
Refitting
- Check that the radio is not damaged.
- Connect the electrical connections.
- Connect the aerial connection.
- Place the radio in position and attach the retainers. Take care not to pinch the electrical wires.
- Check that the radio and the speakers are working.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.