Reversing light switch - r+r
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Warning and manoeuvring indicators › Reversing light switch - r+r
REVERSING LIGHT SWITCH - R+R
Removing
1. Disconnect the electrical connection for the reversing light switch.
| Description | Connector | |
|---|---|---|
| 1 | Reversing light switch | See I020 REVERSING LIGHTS SWITCH |
2. Unscrew and remove the reversing light switch.
Refitting
- Place the reversing light switch in position and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Reversing light switch | M12 | 2.4 ÷ 3.6 | 1.9 JTD |
- Connect the electrical connection for the reversing light switch.
Removing
1. Disconnect the electrical connection for the reversing light switch.
| Description | Connector | |
|---|---|---|
| 1 | Reversing light switch | See I020 REVERSING LIGHTS SWITCH |
2. Undo and remove the reversing light switch.
Refitting
- Place the reversing light switch in its housing.
- Connect the electrical connection for the reversing light switch.
Removing
- Disconnect the negative battery terminal.
1. Disconnect electrical connection (1a) and unscrew and remove the reversing light switch (1b).
| Description | Connector | |
|---|---|---|
| 1a | Reversing lights switch | See I020 REVERSING LIGHTS SWITCH |
Refitting
- Place the reversing light switch in position and connect the electrical connection.
- Connect the negative battery terminal.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.