EXHAUST PIPE INTERMEDIATE HEAT SHIELD R R

Operation 1076A56 · EXHAUST PIPE FASTENINGS AND PROTECTIONS

1.9 JTD 8v, 1.9 JTD 16v

Removing

- For versions without DPF only:

Op. 1076B20 REAR EXHAUST SILENCER - R + R

Op. 1080B62 CATALYTIC CONVERTER - R + R

1. Remove the rivets fixing the heat shield using a drill.

2. Undo the fastenings and remove the heat shield.

Lower the heat shield carefully as the four centre bolts also secure the gear lever mounting.

- For versions with DPF only:

Op. 1076B20 REAR EXHAUST SILENCER - R + R

Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.

1. Loosen the bolts fixing the exhaust pipe mounting bracket to the bodyshell.

2. Remove the rivets fixing the heat shield using a drill.

3. Undo the fastenings and remove the heat shield.

Lower the heat shield carefully as the four centre bolts also secure the gear lever mounting.

Refitting

- For versions without DPF only:

- Place the heat shield back in its housing, tighten the fastenings and fit new rivets.

Op. 1080B62 CATALYTIC CONVERTER - R + R

Op. 1076B20 REAR EXHAUST SILENCER - R + R

- For versions with DPF only:

- Place the heat shield back in its housing, tighten the fastenings and fit new rivets.

- Tighten the bolts fixing the exhaust pipe mounting bracket to the bodyshell.

Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.

Op. 1076B20 REAR EXHAUST SILENCER - R + R