Air chamber reinforcement bracket - r.r.

Make

Fiat

Model

Bravo Factory Service Manual

Year

2007–2014

Section

Inlet and exhaust manifolds › Air chamber reinforcement bracket - r.r.

EngineAir chamber reinforcement bracket - r.r.

AIR CHAMBER REINFORCEMENT BRACKET - R.R.

Operation 1072B53 · INLET MANIFOLDS

1.4 16v TJet

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Open the fuel pipe retaining clip.

2. Open the retaining clip for the engine coolant pipe.

3. Undo the fastenings and remove the air chamber reinforcement bracket.

Refitting

- Place the air chamber reinforcement bracket in its housing and tighten the fastenings.

- Close the retaining clips for the fuel pipe and engine coolant pipe.

Op. 1016A10 SOUND-PROOFING COVER - R.R

08 Engine