Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Bravo Factory Service Manual (2007-2014)08 · Engine
08 · Engine

Exhaust manifold heat shield - r+r

Make
Fiat
Model
Bravo Factory Service Manual
Year
2007–2014
Section
Inlet and exhaust manifolds › Exhaust manifold heat shield - r+r
EngineExhaust manifold heat shield - r+r

EXHAUST MANIFOLD HEAT SHIELD - R+R

Operation 1072C44 · EXHAUST MANIFOLDS

1.4 16v

Removing

- Position the vehicle on a lift.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

1. Undo the upper nuts fixing the heat shield to the exhaust manifold.

EXHAUST MANIFOLD HEAT SHIELD - R+R

1. Undo the nuts (1a) and remove the exhaust manifold heat shield (1b).

EXHAUST MANIFOLD HEAT SHIELD - R+R

Refitting

- Place the exhaust manifold heat shield back in its housing and secure it using the nuts.

Op. 1048A10 AIR FILTER ASSEMBLY - R.R.

- Remove the vehicle from the lift.

1.9 JTD 8v, 1.9 JTD 16v

Removing

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

For versions without a DPF, the Lambda sensor must be removed, with reference to

Op. 1080B90 LAMBDA SENSOR - R.R.

1. Undo the lower bolts fixing the exhaust manifold heat shield.

EXHAUST MANIFOLD HEAT SHIELD - R+R

1. Undo the upper fastenings (1a) and remove the exhaust manifold heat shield (1b) together with the lower one (1c).

EXHAUST MANIFOLD HEAT SHIELD - R+R

Refitting

- Place the upper exhaust manifold heat shield back in its housing and tighten the fastenings.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R

1.4 16v TJet

Removing

- Position the vehicle on a lift.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.

Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1080B62 CATALYTIC CONVERTER - R + R

Op. 1088D50 ENGINE COOLANT OUTLET PIPE FROM TURBOCHARGER - R.R.

1. Undo the rear nut fixing the heat shield to the exhaust manifold.

EXHAUST MANIFOLD HEAT SHIELD - R+R

1. Undo the nuts (1a) and remove the exhaust manifold heat shield (1b).

EXHAUST MANIFOLD HEAT SHIELD - R+R

Refitting

- Place the exhaust manifold heat shield back in its housing and tighten the nuts.

Op. 1088D50 ENGINE COOLANT OUTLET PIPE FROM TURBOCHARGER - R.R.

Op. 1080B62 CATALYTIC CONVERTER - R + R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1076A48 CATALYTIC CONVERTER HEAT SHIELD - R.R

Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Remove the vehicle from the lift.

Parts & tools for this job For 2007 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.