Lambda sensor - r.r.
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Emission control system › Lambda sensor - r.r.
‹ Prev Flexible pipe for particle filter differential pressure sensor - r.r.Next › Front lambda sensor to with catalytic converter - r.r
EngineLambda sensor - r.r.
LAMBDA SENSOR - R.R.
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connection for the Lambda sensor.
| Description | Connector | |
|---|---|---|
| 1 | Lambda sensor | See K040 LAMBDA SENSOR |
1. Undo and remove the Lambda sensor.
Refitting
- Position the Lambda sensor in its housing and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Lambda sensor | M18 | 4.0 ÷ 5.0 | 1.9 JTD |
- Connect the electrical connection for the Lambda sensor.
‹ Prev Flexible pipe for particle filter differential pressure sensor - r.r.Next › Front lambda sensor to with catalytic converter - r.r
Parts & tools for this job For 2007 Fiat Bravo
- PARTOxygen sensorSearch: Fiat Bravo 2007 oxygen sensor
- TOOLOxygen sensor socketSearch: oxygen sensor socket
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.