CATALYTIC PRE-CONVERTER - R.R

Operation 1080B40 · EXHAUST EMISSION CONTROL SYSTEM

1.9 JTD 8v, 1.9 JTD 16v

Removing

The catalytic preconverter is only fitted on the versions without a DPF.

- Position the vehicle on a lift.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1076B20 REAR EXHAUST SILENCER - R + R

Op. 1080B62 CATALYTIC CONVERTER - R + R

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

1. Undo the bolts (1a) and the nuts (1b) and remove the catalytic preconverter mounting bracket (1c) together with the engine oil filter protection (1d).

Op. 1080B90 LAMBDA SENSOR - R.R.

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

1. Loosen the collar (1a) and remove the catalytic preconverter (1b).

Refitting

- Place the catalytic preconverter in its housing and fasten it to the turbocharger, tightening the collar to the recommended torque.

Op. 1072C44 EXHAUST MANIFOLD HEAT SHIELD - R+R

Op. 1080B90 LAMBDA SENSOR - R.R.

- Place the catalytic preconverter mounting bracket in position together with the engine oil filter protection and tighten the nuts and bolts to the recommended torque.

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1080B62 CATALYTIC CONVERTER - R + R

Op. 1076B20 REAR EXHAUST SILENCER - R + R

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Remove the vehicle from the lift.