Catalytic converter excess temperature thermocouple - r + r
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Emission control system › Catalytic converter excess temperature thermocouple - r + r
EngineCatalytic converter excess temperature thermocouple - r + r
CATALYTIC CONVERTER EXCESS TEMPERATURE THERMOCOUPLE - R + R
Removing
- Position the vehicle on a lift.
1. Disconnect the electrical connection for the thermal coupling signalling the overheating of the catalytic converter.
| Description | Connector | |
|---|---|---|
| 1 | Upstream particle filter (DPF) temperature sensor | See K189 UPSTREAM PARTICULATE FILTER TEMPERATURE SENSOR (DPF) |
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
1. Undo the connector and remove the catalytic converter overheating thermal coupling.
Refitting
- Position the catalytic converter excessive temperature signal thermocoupling in its housing and tighten the connector to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Thermocouple signalling catalytic converter overheating | Connector | M14 | 4.1 ÷ 5.0 | 1.9 JTD |
Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.
- Connect the electrical connection for the thermal coupling signalling the overheating of the catalytic converter.
- Remove the vehicle from the lift.
Parts & tools for this job For 2007 Fiat Bravo
- PARTExhaust gasketSearch: Fiat Bravo 2007 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.