Idling c.o. level - check with special equipment
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Emission control system › Idling c.o. level - check with special equipment
EngineIdling c.o. level - check with special equipment
IDLING C.O. LEVEL - CHECK WITH SPECIAL EQUIPMENT
Carry out the measurement with all the emission control devices active and at the specified idle speed.
- Insert the probe of an exhaust gas analyser into the end of the exhaust pipe for at least 30 cm.
If the shape of the exhaust tailpipe will not allow the probe to be fully introduced, add an extension that ensures a seal in the joint area.
- Wait for the exhaust gas tester indices to stabilise.
- With the engine idling, check that the CO2 level is within specified limits.
| Measurement | Value | Validity |
|---|---|---|
| CO2 emissions (in accordance with directive 1999/100/CE) (g/km) | 158 | 1.4 16v |
| Measurement | Value | Validity |
|---|---|---|
| CO2 emissions (in accordance with directive 1999/100/CE) (g/km) | 139 137 (*) | 1.9 JTD 8v |
(*): For specific markets only
| Measurement | Value | Validity |
|---|---|---|
| CO2 emissions (in accordance with directive 1999/100/CE) (g/km) | 149 | 1.9 JTD 16v |
| Measurement | Value | Validity |
|---|---|---|
| CO2 emissions (in accordance with directive 1999/100/CE) (g/km) | 167 | 1.4 16v TJet |
Parts & tools for this job For 2007 Fiat Bravo
- PARTExhaust gasketSearch: Fiat Bravo 2007 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.