Heater - description
- Make
- Fiat
- Model
- Bravo Factory Service Manual
- Year
- 2007–2014
- Section
- Climate control system › Heater - description
HEATER - DESCRIPTION
DESCRIPTION
The climate in the vehicle is controlled by means of the duct/distributor and heater unit.
The climate control system is controlled by means of three control knobs in the dashboard:
- the left knob controls the hot and cold air mixing flap via mechanical controls;
- the central knob regulates air ventilation at four different speeds by means of an electrical control;
- the right knob controls the opening of the flaps that regulate the distribution of air flows;
There are 2 buttons above the knobs:
- the one on the right engages the recirculation function through an electrically-controlled motor
- the one on the left switches on the demisting of the heating rear windscreen and the door mirrors
See E3030 HEATED REAR WINDSCREEN AND DOOR MIRROR DEFROSTING
For more details,
The fan receives a power supply from a line protected by a special fuse and operated by a specific relay in the engine compartment junction unit.
The controls receive a power supply from an ignition-controlled line protected by a fuse in the junction unit under the dashboard.
Parts & tools for this job For 2007 Fiat Bravo
- TOOLA/C manifold gauge setSearch: AC manifold gauge set
- TOOLUV leak detection kitSearch: AC UV leak detection kit
- PARTCabin filterSearch: Fiat Bravo 2007 cabin filter
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.