Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Pressure regulator

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel feed system (2000 range, 1910 JTD) › Pressure regulator
10 EnginePressure regulator

PRESSURE REGULATOR

Diagram of engine soundproofing cover with callout numbers 1, 2, and 3

NOTE Keep everything scrupulously clean when removing-refitting the pressure regulator.

Removal.

  • Remove the guard under the engine if the vehicle is fitted with one.
  1. Remove the engine oil filler cap (1), then unscrew retaining nuts (2) and remove soundproofing cover (3).
  2. Undo bolts (1) securing the injector wiring retaining bands.
    Disconnect the injector electrical connectors (2) and place the wiring to one side.
  • Release the injection wiring harness from the retaining bands.
  1. Undo nuts (1) securing the fuel return manifold pipe (2) to the intake manifold. Place the fuel return manifold pipe to one side.
  2. Disconnect the pressure regulator electrical connector (1), then unscrew bolts (1) securing the regulator to the pump.
Diagram of injector wiring and electrical connectors with callout numbers 1 and 2
Diagram of fuel return manifold pipe connections with callout numbers 1 and 2

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.