Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removal and refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel feed system (2000 range, 1910 JTD) › Removal and refitting
10 EngineRemoval and refitting

Removal and refitting

Diagram showing the throttle body, expansion coupling, and EGR valve with callout numbers 1, 2, and 3
  1. Unscrew bolts (1) securing the expansion coupling to the EGR valve, disconnect pipe (2) connecting the pneumatic valve to the solenoid, then unscrew bolts (3) and remove the throttle body.
  2. Working at the bench, unscrew bolts (1) and separate the expansion coupling from the throttle body.
    Pneumatic valve (2) is secured to the throttle body.

ELECTRIC EGR VALVE

Removing-refitting

  • Remove the throttle body as described in the previous paragraph.
  1. Loosen the bolts(1) securing the EGR connection pipe to the heat exchanger.
Isolated view of the throttle body assembly with expansion coupling and pneumatic valve, labeled 1 and 2
  1. Disconnect the EGR valve self-regulation motor electrical connection; Unscrew bolts (2) securing the EGR valve to the intake manifold, then lift the valve and remove the bolts securing the connection pipe to the heat exchanger (loosened previously).
View of the engine bay showing the EGR valve connection pipe and heat exchanger area, labeled 1
View of the electric EGR valve mounted on the intake manifold with electrical connector and mounting bolts labeled 1 and 2

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.