Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Throttle casing

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel feed system (2000 range, 1910 JTD) › Throttle casing
10 EngineThrottle casing

THROTTLE CASING

Engine bay showing soundproofing cover with callout numbers 1, 2, and 3

Removing-refitting

Remove the battery from the engine bay, then proceed as follows:

  1. Remove the engine oil filler cap (1), then unscrew retaining bolts (2) and remove the soundproofing cover (3).
Close-up of vacuum intake pipes and connections with callout numbers 1 and 2
  1. Disconnect vacuum intake pipe (1) from the vacuum pump by undoing the retaining band. then disconnect pipe (2) connected to the vacuum tank.
  2. Unscrew the bolts securing the pipe connecting the throttle body and intercooler connection sleeve.
  3. Disconnect the oil vapour recovery pipe from the cam cover by undoing the retaining band.
Throttle body assembly with arrows indicating removal direction
Cam cover area showing oil vapour recovery pipe connection with arrow indicator

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.