Deleting errors
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Fuel system (1370 12v) › Deleting errors
10 EngineDeleting errors
Deleting errors
When the frequency counter reaches 0, the fault and associated parameters are deleted.
The entire error memory is cleared immediately in the following cases:
- by means of a "clear error memory" command sent by the tester;
- by interrupting ECU supply (by disconnecting the battery or ECU connector).
Diagnosis using Fiat/Lancia tester
Connect the Fiat/Lancia Tester (F.L.T.) to a socket beside the ECU.
Information is exchanged between ECU and Tester via a two-way serial line (line K) using standard Bosch communication Protocol.
The Tester is able to perform the following functions:
- Error display;
- Engine parameter display;
- Active diagnosis
List of errors
| RPM sensor | Incorrect signal (circuit open) Loss of synchronism (implausible signal) |
| Throttle potentiometer | Race 1 defective - Race 2 defective - Synchronisation error between races |
| Air temperature sensor Coolant temperature sensor |
A.C.-D.C. A.C.-D.C.- False contact - Implausible signal |
| Lambda probe | A.C.-D.C.- Limit reached for lambda reconstruction and self-adaptive factor |
| Idle speed actuator Control unit |
A.C.-D.C. ECU memory anomalies indicated |
| Detonation sensor Fiat CODE |
A.C.-D.C. Code not recognised or not received |
Parts & tools for this job For 1995 Fiat Bravo
- PARTFuel filterSearch: Fiat Bravo 1995 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.