CNG/FUEL SWITCH - R R

Operation 1058A44 · GAS CIRCUIT MULTI POINT INJECTION

2.0 16V

Removing

Disconnect the negative battery terminal.

Close the manual methane cut-off valves on the cylinder unit.

2.0 16V · up to 02/05

1. Disconnect the electrical connection frrom the pressure sensor.

2. Undo the pressure sensor from the pressure reduction unit and remove.

2.0 16V · from 03/05

1. Disconnect the electrical connection frrom the pressure sensor.

2. Undo the pressure sensor from the pressure reduction unit and remove.

2.0 16V

Refitting

Fit the CNG pressure sensor and tighten.

Connect the CNG pressure sensor electrical connector.

Move the CNG cut-off solenoids to open position by hand and check system is efficient.

Connect the negative battery terminal.