Cng injection unit control unit - r r
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Gas circuit › Cng injection unit control unit - r r
CNG INJECTION UNIT CONTROL UNIT - R R
Removing
Disconnect the negative battery terminal.
Op. 7045A12 FRONT PASSENGER SEAT(S) - R.R.
Release the floor trim at the side.
1. Undo the fixing bolts (1a) and remove the protective cover (1b) for the CNG system control unit.
2. Disconnect the electrical connections (2a) and remove the CNG control unit (2b).
| Description | Connector | |
|---|---|---|
| 2a | Methane injection control unit | M019A |
| Description | Connector | |
|---|---|---|
| 2a | Methane injection control unit | M019B |
Refitting
Position the CNG system control unit and connect the electrical connections.
| Description | Connector | |
|---|---|---|
| Methane injection control unit | M019A |
| Description | Connector | |
|---|---|---|
| Methane injection control unit | M019B |
Fit the protective cover for the CNG system control unit and tighten the fixing bolts to the recommended torque.
| Value daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 0.8 | Bolt | M6 |
Restore the position of the floor covering.
Op. 7045A12 FRONT PASSENGER SEAT(S) - R.R.
Connect the negative battery terminal.
Parts & tools for this job For 2002 Fiat Ducato
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.