CNG INJECTION WIRING HARNESS - ARRANGE

Operation 1058A90 · GAS CIRCUIT MULTI POINT INJECTION

2.0 16V

Removing

Position the vehicle on the lift.

Disconnect the negative battery terminal.

Raise the vehicle.

1. Undo the retaining nuts.

2. Remove the fastening studs.

3. Remove vertical guard from its seat.

1. Disconnect the electrical coupling.

1. Disconnect the electrical connections for the cut out solenoid valves on the canisters.

2.0 16V · Upgraded autonomy

1. Disconnect the electrical connections for the cut out solenoid valves on the additional canisters.

2.0 16V

Release the wiring from the fastenings on the body and remove it.

Refitting

Place the wiring in position and secure it to the bodyshell using the special fastenings.

2.0 16V · Upgraded autonomy

Connect the electrical connections for the cut out solenoid valves on the additional canisters.

2.0 16V

Connect the electrical connections for the cut out solenoid valves on the canisters.

Connect the electrical coupling.

Place the vertical shield in position.

Secure the vertical guard using the special buttons and fixing nuts.

Lower the vehicle.

Connect the negative battery terminal.

Remove the vehicle from the lift.