2. Check (page 11 of 18)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Engine: refitting
03 Engine - 3.0 HDi2. Check · page 11 of 18
![Diagram showing a dial gauge [3] and a support tool [4] fitted to the top of a cylinder block. Callout 'f' points to the piston protrusion, and callout 'g' points to the cylinder block surface.](/fiat/ducato-2006-2017/assets/page_458_fig01.png)
Fit the tools [3], [4] on the cylinder block .
Set the dial gauge [3] to 0 (at "g").
Measure the piston protrusion (at "f").
Use the highest piston as a reference.
The value must be between 0,3 and 0,6 mm.
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.