2. Check (page 14 of 18)
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Engine: refitting
03 Engine - 3.0 HDi2. Check · page 14 of 18
![A close-up view of a tool [9] with a gold-colored cap positioned on the engine cylinder block, with an arrow labeled 'j' pointing to a nut.](/fiat/ducato-2006-2017/assets/page_461_fig01.png)
Figure : B1BM008D
Position the cap of the tool [9] on the centring cone of the tool [9].
Tighten the nut in the tool [9] (at "j").
Stop the tightening of the nut when the cap of the tool [9] is at the limit on the cylinder block.
Remove the tool [9].
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.