Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)12 · Brakes
12 · Brakes

Brake fluid minimum w/l switch - r + r

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Hydraulic brake system › Brake fluid minimum w/l switch - r + r
BrakesBrake fluid minimum w/l switch - r + r

BRAKE FLUID MINIMUM W/L SWITCH - R + R

Operation 3330C44 · BRAKE PUMP, RESERVOIR AND LOAD PROPORTIONING VALVE

Removing

- Disconnect the negative battery terminal.

Op. 5530B10 BATTERY - R+R

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the electrical connection from the brake fluid minimum warning light switch.

DescriptionConnector
1Brake fluid level sensor (switch)See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)

2. Compress the spring and simultaneously remove the minimum brake fluid warning light switch from the reservoir.

BRAKE FLUID MINIMUM W/L SWITCH - R + R

Refitting

- Place the brake fluid minimum level warning light switch in its housing and connect the connection.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 5530B10 BATTERY - R+R

- Connect the negative battery terminal.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.