BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE

Operation 3330C30 · BRAKE PUMP, RESERVOIR AND LOAD PROPORTIONING VALVE

Removing

- Disconnect the negative battery terminal.

Op. 5530B10 BATTERY - R+R

1. Connect a suitable recipient to the bleed valve of one front brake caliper.

2. Loosen the bleed valve and pump the brake pedal several times to drain the oil inside into the brake fluid reservoir.

1. Disconnect the fluid supply pipe to the clutch pump.

2. Disconnect the electrical connection from the brake fluid minimum warning light switch.

3. Undo the tabs securing the tank to the brake pump and remove.

Refitting

- Refit the reservoir in its seat on the brake pump and do up the clips.

- Connect the electrical connection to the brake fluid minimum level warning light switch.

- Connect the fluid supply pipe to the clutch pump.

Op. 5530B10 BATTERY - R+R

- Connect the negative battery terminal.