E.G.R. SYSTEM SOLENOID - R + R

Operation 1080C24 · EXHAUST GAS RECIRCULATION SYSTEM (E.G.R.)

1.9 Multijet

Removing

Op. 5530B10 BATTERY - R+R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R

Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R

Op. 1060G50 THROTTLE BODY - R.R

1. Loosen the collar (1a) and disconnect the exhaust gas outlet hose from the exhaust gas/water heat exchanger for the E.G.R. system (1b), heat exchanger side.

2. Disconnect the electrical connection for the E.G.R. system solenoid valve.

3. Undo the fixing bolts (3a) and remove the E.G.R. system solenoid valve (3b) complete with hose.

Refitting

- Place the gasket back in its housing.

- Place the E.G.R. system solenoid valve in its housing complete with hose and fasten it tightening the bolts to the recommended torque.

- Connect the electrical connection for the E.G.R. solenoid valve.

- Connect the exhaust gas outlet hose from the exhaust gas/water heat exchanger for the E.G.R. system, heat exchanger side and tighten the collar.

Op. 5530B10 BATTERY - R+R

Op. 1060G50 THROTTLE BODY - R.R

Op. 1048B27 RIGID PIPE FOR AIR INLET TO THROTTLE BODY - R R

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R